Stubble cooler is a new type of brewing equipment, which has the characteristics of high speed and high power. It can actively add water, bend down, discharge, mix evenly, disperse cooling effect and its ambition. Each stubble cooler is composed of bending equipment, which is one of the more important equipment of stubble cooler.
The bending equipment is located at the bottom of the stubble cooler to collect the leakage at the blanking port, and then save materials to prevent waste.
1. A connecting basket is arranged directly below the blanking opening of the adding hopper of the stubble cooler and above the transmission chain at the bottom of the stubble cooler;
2. Both ends of the connecting basket are separately fixed on the cross beam of the stubble cooler support;
3. The connecting basket is a folding guard plate raised at one end;
4. The lifting end of the folding guard plate is provided with an adjusting bolt for adjusting the folding height of the connecting basket on the cross beam;
5. The connecting basket is used to form a collection structure for the leakage in the blanking opening of the feeding hopper.
6. The utility model can effectively collect and reuse the leaked materials, and then save materials.
The above is the characteristics of the bending equipment of the stubble cooler. We must understand and understand the characteristics of the equipment when using it in order to better use it.
The above information is published by our automatic stubble cooler. I hope it will be helpful to you. Our website is: http://www.yangnou.cn/ ！